Garage door slide lock is also known as a latch, side lock, and side bolt. Do you know the way to install a garage door slide lock or side bolt? If you are an owner of a house, you may have a garage door slide lock.
So it is necessary to learn the process to install a garage door slide lock. Today, I’ll try to discuss the ways that help you to install a garage door slide lock. Stay tuned.
How to install garage door slide lock:
Required equipment to install a garage door slide lock
If you want to do this job carefully, you need some equipment:
• Latch with 2.5 inches basic bolt
• Drill Screws for steel doors
• Slack Screws for lumber doors
• Effect Wrench
• Screw Driver
Steps to install garage door slide lock
The garage door repair ST Paul locks are known as turned locks. These locks are a savvy approach to make sure about your overhead entryway if your entryway is opened physically without the utilization of a carport entryway opener.
These locks are easy to install if you have collected the required equipment. Again, you need to follow the below steps carefully.
Step 1
The slide lock ought to be introduced on the second segment from the base. However, it is an important term to remember. Again, the entryway maker will give a little rectangular slug layout in the vertical track. So carefully check it whether it is okay or not! I will suggest you keep that out so the hook on your lock will experience the track.
Step 2
Adjust the slide lock with the screws and tighten them carefully. Well, now introduce 2 penetrating hex screws. You need to make an option to provide pilot holes. But remember in mind that it is risky to fix the drilling screws more tightly. Additionally, this may strip out the clasp string.
Step 3
Find the rectangular space in the longitudinal portion of the entryway that remains into carport. This opening is typically situated beside the subsequent entryway segment near the ground.
Step 4
Find the screw openings on the carport entryway’s subsequent area legitimately to one side. Yes, you need to find the space carefully. So you have to do this job accurately.
Step 5
Force the provided metal screws. Now, counsel the lock’s guidelines for explicit latch types. Before installing new lock, remove the older one. It is the fundamental basic of this job.
Step 6
Fix the screws carefully so that you can get a long lasting service. The screws will make the lock more strong and durable. Again, use the screwdriver.
There you’ve the step by step process on how you can successfully install the garage door lock.
Tips for installing
• Change the lock from the right side to the left
• Find the screw openings on the carport entryway’s subsequent area legitimately to one side of the track’s rectangular space.
• Unplug Opener Cord carefully.
• Supplant the toss springs on the contrary segment from a unique position.